4030 is not recommended for use with candy2o.4030 is less viscous than 4050, so colors don’t have to be as thinned as much for airbrushing.4050 is generallyīest for spray-gun, however, for airbrush use, both 40 work well. Compared to 4050, 4030 creates a softer coating, which may be beneficial for airbrushing.Similar to 4050, adding 4030 to paints creates an acrylic – urethane resin blend. For colors mixed withĤ050, ~ 10% more 4011 is added: 30% v/v for airbrush and 20% v/v spray-gun.Ĥ030 is another mixing clear. Generally, 4011 is added to colors ~ 20% v/v for airbrush and 10% v/v for spray-gun.Allow mix 10+ minutes before spraying for best flow and leveling. Add 4011 in amounts to achieve best atomization. AutoBorne Sealer does not require mixing with 4050.Ĥ011 is the recommended thinner for all Createx Colors paints and clears.candy2o has 4050 mix ratios different from other Createx paints.Allow mix 10+ minutes to acclimatize before spraying for best flow and leveling.Spray-Gun: Add ~ 10% v/v (9:1) to standard & fluorescent colors,Īdd ~ 20% v/v (4:1) to pearl & metallic colors.Airbrush: Add ~ 10% v/v to Createx paints, then thin with 4011 Reducer, ~ 10% - 30% v/v.F⁰ during the initial 48 hours after application.įor best results, add 4050 UVLS Gloss Clear to paints, then thin as needed with 4011 ReducerĤ050 is a urethane clear that when mixed with Createx paints, creates an acrylic – urethane resin blend. Allow paint to dry in temperatures over 60 deg.Remember to supplement this guide with the product's Technical Data Sheet available at Dry Times for Adequate Curing are set for70⁰F / 21⁰C and 50% Relative Humidity Follow the basic application process and use a test panel before all applications. Welcome to the Hard Surface & Automotive Guide! This guide covers the application of Createx Colors paints on hard surfaces, including automobiles.

Printable airbrush paint viscosity test